HCT / HATCH
Dynamic discharge systems with roof-mounted extract fans and motorised opening function. Suitable for installation in industrial or commercial buildings. Can be used for ambient ventilation in the buildings in which it is installed.
Fan:
- Very robust structure able to withstand extreme weather conditions.
- Equipment structure made of anti-corrosive galvanised sheet steel.
- Water-tight design to prevent water entry.
- Heat insulation of 60mm to prevent hot air loss in the winter.
- Adaptable skirting for correct, easy installation on the roof.
- Maintenance switch fitted with NA/NC auxiliary contact to control equipment disconnection.
- Tubular casing in sheet steel with polyester resin anti-corrosive treatment.
- Cast aluminium rotors.
- 125 rotors made of cast aluminium with 6 or 9 blades with adjustable angle of inclination.
- Anti-corrosive finish on galvanised sheet steel.
Opening system:
- Motorised opening arms, with encapsulated IP-65 mechanism.
- Supply voltage 230 V. AC 50Hz.
- Reinforced, guaranteed system with more than 10.000 operations at maximum load.
- Maximum load 1.000 N.
- Automatic opening function via external control system signal (fire station, smoke detector...). Control systems not included in the supply.
- Limit switch to signal the hatch position.
Motor:
- IE3 efficiency motors for powers equal to or greater than 0.75 kW except single-phase, 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Three-phase 230 / 400V - 50Hz (up to 4 kW) and 400 / 690V - 50Hz (powers higher than 4 kW).
- Operating temperature: -25°C to +50°C.
On request:
- Polyester resin anti-corrosive paint finish.
- Motorised opening arms with supply voltage of 24V. DC.
- HCT / HATCH : 7.100 ÷ 123.700 m3/h